Dania Beach, FL  

954-688-3308 Contact Us
Inventory Search
TO
TO
TO
Search
2018 Mako 214 CC
Boat Details
Year 2018
Length 21 ft 5 in (6.53 meters)
Located in Dania, FL
Sale Status Active
Number of Engines 1
Horsepower (total) 150 hp
Engine Make: MERCURY MARINE
Engine Model: 150XL 4S
Fuel Capacity 91 gal
Hull Material Fiberglass
Deadrise at Transom 18 °
Beam 8.5 ft
Dry Weight 3,100 lb
Hull ID BUJ90669G718
Convertible Saloon NO
Fuel Tank Count 1
Length Overall 21.42 ft
Max Draft 1.17 ft

With its wave-crushing Deep V hull and interior creature comforts, the MAKO® 214 CC is the ideal balance of predatory performance and an on-the water recreation hub. Bow and forward console seating adds comfort for family and friends, and the optional deck filler and cushions make add a forward lounge area.
It's hard to beat the fishability of this fine boat. Storage for rods, tackle, electronics and fish is more than enough for any adventure. And there's room at the helm for at least two 12" fishfinders. All this, and it's backed by MAKO Assurance 5+Life—the best warranty in the business.

  • Backed by the MAKO® Assurance 5+Life—the best factory warranty in the business
  • Foam-injected hull w/1-piece fiberglass stringer grid
  • Hull/deck joint chemically bonded & fastened 360° w/316 stainless steel fasteners
  • Self-bailing cockpit w/non-skid deck surface
  • Under-gunnel port & starboard rod racks for 6 rods
  • Center console w/analog gauges, large electronics mounting surface, stainless steel grab rail, acrylic windscreen & storage
  • NEW 2-tone high-density marine-grade vinyl upholstery w/ composite substrates on seats
  • 2 pedestal helm seats & forward console seat w/72-qt. insulated, drained cooler
  • Port & starboard bow seating w/108-qt. insulated fishboxes w/drains below
  • 210-qt. in-deck storage w/recess for 5-gal. bucket
  • Non-skid surface on walking flats, foredeck, gunwale tops, sole, stern platform & hatch covers
Additional Specs
  • Length:21' 5"
  • Beam: 8' 6"
  • Bottom width: 6' 7.5"
  • Max. recommended HP: 250 HP
  • Fuel capacity: 91 gal.
  • Max. person capacity: 10 persons
  • Max. person weight: 1700 lbs.
  • Max. person, motor & gear weight: 2550 lbs.
  • Interior depth: 27"
  • Transom height at center line: 25"
  • Deadrise: 18 degrees
  • Draft: 14"
  • Dry weight: 3735 lbs.
  • Average hull weight: 3100 lbs.
  • Average package weight: 4535 lbs.
  • Package height: 9' 3"
  • Package height w/T-top or hardtop: 11' 2"
  • Storage length: 30' 8"
Standard Features

Certification & Safety

  • Backed by the MAKO® Assurance 5+Life—the best factory warranty in the business
  • NMMA® certified
  • Factory leak tested for hull, plumbing & fitting integrity
  • Stainless steel hardware & fasteners for corrosion resistance
  • CorrosionX stainless spray treatment included
  • Horn

 

Console

  • Custom anodized aluminum steering wheel w/knob
  • Binnacle-mounted motor control
  • Gauge panel w/analog gauges
  • Heavy-duty electrical switching system w/battery selector switch(es)
  • Switch panel w/manual reset circuit breakers & illuminated switches
  • Easy access to helm electronics, instruments & switches
  • Removable forward-console seat w/72-qt. (68 L) insulated, drained cooler
  • Integrated full-width footrest
  • Acrylic windscreen
  • Easy-access battery storage
  • Marine-grade tinned wiring w/submersible connectors
  • Lockable, sealed glovebox
  • Extra-large electronics mounting surface
  • 2 console drink holders

 

Construction & Exterior

  • 100% composite construction
  • Coosa® Bluewater 100% composite transom core
  • Heavy-duty, fiberglass-encapsulated transom w/2" (5.08 cm) fiberglass-impregnated, high-density composite core
  • Hull/deck joint chemically sealed & bonded 360° & mechanically fastened every 6" (15.24 cm) w/316 stainless steel fasteners
  • 1-piece molded fiberglass stringer grid w/integrated transom knee supports & gelcoat finish
  • Closed-cell, foam-injected stringer grid for USCG-approved flotation
  • Premium marine-grade stainless steel hardware
  • Heavy-duty rub rail w/stainless steel insert
  • Closed-molded hatch covers w/finished undersides & integrated gaskets
  • Aluminum backing plates for cleats, chocks & hinges
  • MAKO® Bone White gelcoat

 

Electrical, Mechanical & Plumbing Systems

  • High-speed raw water intake
  • USCG-compliant navigation lights
  • 2 cockpit courtesy lights & 1 head light
  • Marelon® corrosion-free seacocks on all below-water thru-hull fittings
  • Labeled, tinned-copper wiring for easy maintenance & protection in a marine environment

 

Head

  • Head enclosure/storage space w/stainless steel latch

 

Interior

  • NEW 2-tone high-density marine-grade vinyl upholstery w/stain-resistant coating & composite substrates on seats
  • Top-loading anchor locker that will accommodate 12" (30.5 cm) anchor retrieval ball
  • Foredeck dodger mounting boss
  • Port & starboard bow seats w/108-qt. (102 L) fishboxes w/gravity overboard drainage
  • 210-qt. (199 L) in-deck storage w/recess for 5-gal. (18.93 L) bucket
  • Low profile brushed anodized aluminum bow rails
  • 2 gunnel-mounted rod holders
  • Port & starboard under-gunnel rod racks for 6 rods up to 7' (2.1 m) long
  • Port & starboard aft seats w/13-gal. (49 L) aerated baitwell below port cushion
  • Molded non-skid surfaces throughout
  • Bilge access hatch
  • Port & starboard molded-in swim platforms
  • Six 6" (15.24 cm) polished marine-grade stainless steel cleats

 

Leaning Post

  • Anodized aluminum leaning post
  • Flip-up cushion
  • Storage below
  • Rod holders

 

Optional Trailer

  • OPTIONAL tandem-axle EZ Loader® aluminum trailer available
  • NMMA® certified.
  • DOT approved.
  • Tandem-axle brakes.
  • 14" (35.6 cm) radial tires w/galvanized V5 wheels.
  • Oil bath hubs.
  • Leaf spring suspension.
  • Heavy-duty winch w/nylon strap & safety strap.
  • Stainless steel hardware.
  • Galvanized steel components.
  • LED lighting.
  • PVC loading guides.

 

Performance

  • Legendary dry-riding MAKO® hull
  • Aggressive deep V hull design
  • Performance lifting strakes
  • Recessed electric trim tabs
  • Factory-matched stainless steel propeller(s)

 

T-Top or Hardtop

  • Canvas T-top
  • .25" (.64 cm) aluminum backing-plate reinforcement for T-top
  • Electronics box
Disclaimer
* We employ best efforts to present accurate pricing, specifications, features and availability for models shown on this site. On occasion, data transmission errors may produce anomalies in information presented. Photos could show optional accessories not included in the listed price or not available on the actual model in stock. Should you have questions about what you see here, your dealer will be able to confirm correct availability, model content and pricing. Inventory shown is subject to prior sale or transfer to another location.
Base Price $42,495
   Included Options (Call For Details) $6,440
   Prep $445
   Freight $2,500
Your Price* $51,880
Additional Information
Mako Website
Dealer Information
Name Bass Pro Shops / Tracker Boat Center DANIA BEACH
Location 200 Gulf Stream Way
Dania, FL 33004
US
Phone 954-688-3308
Email: bebednarz@basspro.com

5-Star Certified Boat Marine Dealership

954-688-3308
200 Gulf Stream Way
Dania Beach, FL 33004
Mon - Sat
10:00 AM
-
9:00 PM
Sun
10:00 AM
-
7:00 PM
Join Us